Tile Wall begins with raw clay and an architectural line. Extruded through a die designed and machined in house, each 250 mm form is ribbed along its length, with its texture and colour left to the clay.
Firing is the only finish. Terracotta is fired to an earthy tone, Sand Speckle carries grey undertones, and Black Chocolate is a warm, textured black. Each body fires in its own way, and within each one, every tile carries subtle differences of its own.
Tile is made by Melbourne ceramicists using a time-honoured method long used for roof tiles, and carries the same resilience. It suits a facade as readily as the bathroom, the kitchen or the bedside, and carries just as well into hospitality and commercial interiors.
The IP65 bracket holds the ceramic without a visible fastener, and its duplex coating gives lasting corrosion resistance and a durable finish. Light leaves above and below, washing the wall, the floor and the ceiling. Tile pairs with earthy material palettes and clean architectural lines, at the front entrance and inside.
Designed and made in Melbourne. Available across Australia and New Zealand.
MATERIALS
Ceramic, Powder Coat Body
DIMENSIONS
250 H x 84 W x 97 D mm
WEIGHT
1.3 kg
CUSTOMISATIONS
Ceramic Finish: Terracotta, Sand Speckle, Black Chocolate
Body Finish: Very Terracotta, Surfmist, Black Ace. The body always matches the ceramic: Terracotta with Very Terracotta, Sand Speckle with Surfmist, Black Chocolate with Black Ace.
Colour Temperature (CCT): 2700K – Warm White, 3000K – Natural White, 3500K – Mid White
Control: Non Dimmable, Phase Dimmable, Dali Dimmable
Tile Wall begins with raw clay and an architectural line. Extruded through a die designed and machined in house, each 250 mm form is ribbed along its length, with its texture and colour left to the clay.
Firing is the only finish. Terracotta is fired to an earthy tone, Sand Speckle carries grey undertones, and Black Chocolate is a warm, textured black. Each body fires in its own way, and within each one, every tile carries subtle differences of its own.
Tile is made by Melbourne ceramicists using a time-honoured method long used for roof tiles, and carries the same resilience. It suits a facade as readily as the bathroom, the kitchen or the bedside, and carries just as well into hospitality and commercial interiors.
The IP65 bracket holds the ceramic without a visible fastener, and its duplex coating gives lasting corrosion resistance and a durable finish. Light leaves above and below, washing the wall, the floor and the ceiling. Tile pairs with earthy material palettes and clean architectural lines, at the front entrance and inside.
Designed and made in Melbourne. Available across Australia and New Zealand.
MATERIALS
Ceramic, Powder Coat Body
DIMENSIONS
250 H x 84 W x 97 D mm
WEIGHT
1.3 kg
CUSTOMISATIONS
Ceramic Finish: Terracotta, Sand Speckle, Black Chocolate
Body Finish: Very Terracotta, Surfmist, Black Ace. The body always matches the ceramic: Terracotta with Very Terracotta, Sand Speckle with Surfmist, Black Chocolate with Black Ace.
Colour Temperature (CCT): 2700K – Warm White, 3000K – Natural White, 3500K – Mid White
Control: Non Dimmable, Phase Dimmable, Dali Dimmable
GALLERY
